Install CWM 6 on Note 4 N910C, N910U, N910F, N9108V, N910K, N910G, N910S, N9106W
Posted in CWM recovery
No comments
Thursday, 6 November 2014 By htwe naing
- Download the CWM Odin flashable file for your device from the list given below:
- N910C CWM 6.0.5.1
- N910U CWM 6.0.5.1
- N910F CWM 6.0.5.1
- N9108V CWM 6.0.5.1
- N910K CWM 6.0.5.1
- N910G CWM 6.0.5.1
- N910S CWM 6.0.5.1
- N9106W CWM 6.0.5.1
- (Credits)
- PC Odin 3.09
How to Install CWM 6 on Galaxy Note 4:
- Unzip the file for your specific device model and place the extracted content anywhere on your PC
- Start Odin 3.09
- Click on the AP button and select downloaded .tar.md5
- Odin will analyse the file and make it ready for flashing
- Now you need to turn off your smartphone and put it into “Download Mode”
- To do so, fist make sure that your device is completely turned off
- Now press and hold Volume Down + Home + Power keys
- Do not leave these buttons until you see a warning screen
- Now press Volume Up key to continue
- Now using the original USB cable, connect it to PC
- “Added!!” message will appear in the box at bottom of Odin
- If phone is connected correctly, the colour or ID:COM box will change as well
- Make sure that only F.Reset Time and Auto Reboot are ticked
- Do not tick any other box given here
- Now just click on the start button
- The file will be flashed in few seconds
- It will reboot itself
- That’s all!
- To enter the install CWM custom recovery, turn off the device, press and hold volume up + home + power buttons.
Related posts
Share this post
Myanmar Kyat Converter.png)
0 comments: